The Selas Superflame™ are burners designed for process temperatures up to 2500°F (1371°C), and incorporates two-stage combustion for low NOx. Features and Benefits:
Applications:
Watch this video to see how easy it is to change or replace the shaft in a Semens SQM5 actuator.
The Siemens SQM5 reversing actuators are used for the positioning of flow control valves, butterfly valves, dampers, or any application requiring rotary motion. The SQM5 actuators accommodate control input signals of 4 to 20 mA, 0 to 135 Ω, 0 to 10 Vdc, 0 to 20 mA, position proportional and floating control. The available output signals include 4 to 20 mA, 0 to 135 Ω, 0 to 10 Vdc, 0 to 20 mA, and 0 to 1000 Ω. SQM5 actuators are available with up to six internal, easily adjustable switches.
For more information about the Siemens SQM5, contact Combustion Technology, LLC. Call them at 800-327-1831 or visit this web page - https://combustion-tech.net/article_89_The-SQM5-Actuator.cfm.
In drying and coating processes in the pharmaceutical, food and beverage, chemical, petrochemical, and mining sectors, millions of dollars are lost daily - in fluidized beds, rotary drums, flash dryers, kilns, and similar processes. Because of improper air and product feeds, these devices' failure can cause validation problems, causing downtime, re-validation, and loss of both goods and profits. It's vital to control airflow through these devices.
PROBLEM
How can vital processes and devices that need to work within tight tolerances over a broad operating range be supported with continuous air mass flow at a regulated air temperature?
The off-specification product must be recycled or wasted. This process is too costly, especially in the validated industries. Precise control of airflow and air temperature is essential to maintain high product quality, reduce waste, and increase uptime. The performance of many processes would benefit from measuring the mass flow of process air. Also, limited flow meter turndown often constrains operational flexibility - primarily when requirements cover a wide range of operating conditions.
Airflow meters incorporated into process equipment are often inaccurate due to the short upstream and downstream straight pipe run. The installation of a good straight run can quickly become problematic in tight quarters, so other solutions are needed.
Most process equipment designs do not include relatively dirty exhaust flow measurements, even though they can provide significant operational benefits. They are often not included because exhaust flow meters can become coated and plugged when particulates are present — reducing flow meter accuracy.
Products from Air Monitor solve these issues by enhancing the reliability of your airflow meters by improving their accuracy over a wide range of flow rates, thus improving the process's efficiency, improving the product's consistency, and increasing production rates to reduce fuel spending.
For more information, contact Combustion Technology, LLC. Call them at 800-327-1831 or visit their website at https://combustion-tech.net.
The Siemens Combustion Controls LMV5 Linkageless Burner Management System delivers a fully integrated system that is easy to install and commission and provides improved burner performance, efficiency, accuracy, and safe operation.
For more information about Siemens Combustion Controls in the Pacific Northwest, contact Combustion Technology, LLC. Call them at 800-327-1831 or visit their website at https://combustion-tech.net.
Through seven SMART LEDs, the control provides current operating status and lockout information in a safety shutdown event. A complete BurnerPRO system includes the BP110/230, flame scanner, and wiring base.
The BurnerPRO performs a safety self-test on every start. If a flame is detected before the startup or during the purge cycle, the fuel valves will not be energized, and the control locks out. The LEDs and alarm terminal is used to annunciate the presence of a lockout condition.
